Açıklama

- Universal portal machining center model UPFZ 40 - built in 1998
- with tool changer and CNC control Siemens 840 D
- Machine was completely revised in 2010 and with new controls
Fitted.
- The main spindle was replaced on August 2020.
- CNC control Siemens 840 D Powerline
- Traverse paths X/Y/Z (vertical) 8000/3500/1150 mm
- Working space height min. 160 mm - max. 1310mm above sea level corridor
- Rapid traverse X/Y/Z 15/15/10m/min
- Clamping surface Rails embedded in the foundation
- Spindle speed range 30-4000rpm
- Spindle power max. 40 kW at 40% ED
- Spindle torque max. 191 Nm at 40% ED
- 2-axis swivel head locking of the Au and B-axis with 2.5°
Hirth toothing
- Tool holder SK 40 DIN 69871 A /69872 A
- Tool change traveling chain magazine - 50 tools
Tool places max. 8kg/300mm

Drive engine: DME 112 AL-4AGS (Kessler)
- Rapid traverse (X/Y/Z) 15/15/10 m/min
- External cooling via adjustable nozzles; coolant dr. 2 bar
- IKZ high-pressure pump 20 bar; External container
Paper tape folder 600l.
The following revision work was carried out in 2009/2010
- Old CNC control Siemens 840 C replaced by Siemens 840D
- All drives and corresponding control cabinet modules renewed
- Replacement of the complete wiring harness including plugs
- Guide rails, counter-guides, covers, tool changer cassettes,
Tool changer arm checked and partially replaced with new ones.
- August 2020 replacement of the main spindle